Long Hand-Beaded Classic Arabic Evening Dress Style
When a request arrives with موديل فستان سهرة طويلة خرز كلاسيك in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production this is a long hand-beaded evening dress in the classic direction. A long evening dress runs to the ankle or the floor, which makes sweep and hem finish the design. A floor-length hem needs a horsehair or a weighted tape, or it will collapse in wear. Hand beading is quoted per panel, not per garment: density, bead size and the number of tones decide the price. It also decides the weight, which pulls on every seam it crosses. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
A classic evening dress is the version a buyer repeats season after season - a clean neckline, a fitted bodice and a skirt that does not date.
What Has To Be Specified
- Shell: Hand-Beaded, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Length: Long, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Hand-Beaded - swatch-approved, one dye lot for bulk |
| Length | Long |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt unlined |
| Closure | concealed side zip |
| Size run | 34-48 with a Gulf grade |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 300 pcs per style for custom beading |
Where This Style Goes Wrong In Production
Hand beading is quoted per panel, not per garment: density, bead size and the number of tones decide the price. It also decides the weight, which pulls on every seam it crosses.
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Options We Can Build To
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
