Long Satin Turkish Arabic Evening Dress with Long Sleeves
When a request arrives with فستان سهرة أكمام طويلة تركية in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production this is a long satin long sleeves evening dress in the turkish direction. A long evening dress runs to the ankle or the floor, which makes sweep and hem finish the design. A floor-length hem needs a horsehair or a weighted tape, or it will collapse in wear. Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement. A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.
Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull. Turkish evening wear is a fitted bodice with a very full skirt, usually in tulle or taffeta, and it is the reference most often sent to us with a photo of a bridal salon window.
What Has To Be Specified
- Shell: Satin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Length: Long, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
- Block: Ball Gown bodice, fitted on a real model at the middle size before grading.
- Detail: Long Sleeves. Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Satin - swatch-approved, one dye lot for bulk |
| Length | Long |
| Silhouette | Ball Gown |
| Bodice | Long Sleeves |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt lined |
| Closure | covered button placket |
| Size run | 34-48 with a Gulf grade |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement.
A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.
Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Options We Can Build To
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Detail alternatives on the Long Sleeves: scaled up, reduced to a plain panel, or moved to the back for a cleaner front.
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
