Women's All Season Woven Kente African Two-Piece Set

“women's all season woven kente african two piece set” maps to a reasonably specific garment in production terms, and that is what makes the phrase useful. In four or five words it tells a factory the silhouette, the cloth family and the occasion.

In practical terms this is a two-piece set in kente cloth built for women, scheduled against all-season programmes. Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential. A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container. An all-season programme only holds together if the shell is a stable, repeatable base cloth rather than a seasonal novelty.

What Has To Be Specified

• Shell: kente cloth, weight and hand approved on a physical swatch, not on a screen.
• Block: two-piece set, fitted on a real model at the middle size before grading.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential.

A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Options We Can Build To

• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.