Dashiki Urban Woven Kente African Dress with High-Slit

The phrase “dashiki urban woven kente african dress with high slit” reads like a styling note and behaves like a spec sheet. Once you unpack it, it names a cloth, a cut and a wearer - and those three decisions fix roughly eighty per cent of the cost before a single sample is cut.

In practical terms this is a dress in kente cloth built for women. Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential. A dress is the anchor of this category: one garment, one fit decision, and a silhouette that has to hold from the bust line to the hem without a waist seam to hide behind.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.

What Has To Be Specified

• Shell: kente cloth, weight and hand approved on a physical swatch, not on a screen.
• Block: dress, fitted on a real model at the middle size before grading.
• Detail: a high front slit. A high front slit needs a facing or a bound edge, and it needs the slit stop reinforced — that is where every one of these returns begins.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential.

A high front slit needs a facing or a bound edge, and it needs the slit stop reinforced — that is where every one of these returns begins.

A dress is the anchor of this category: one garment, one fit decision, and a silhouette that has to hold from the bust line to the hem without a waist seam to hide behind.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

Options We Can Build To

• Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
• Detail variations on the a high front slit: scaled up, scaled down, or replaced with a plain panel at a lower price point.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.