Women's Plus-Size Metallic Bronze African Kaftan Boubou with Headwrap

Searches for “women's plus size metallic bronze african kaftan boubou with headwrap” rarely come from someone browsing a single piece. They come from buyers building a range: a boutique testing a new line, a wholesaler filling a container, or an established brand that needs a second source for a style it already sells.

In practical terms this is a kaftan boubou in metallic wax built for women. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.

What Has To Be Specified

• Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
• Block: kaftan boubou, fitted on a real model at the middle size before grading.
• Detail: a matching headwrap. The headwrap is cut from the same lot as the garment and finished on all four edges; if it is a separate SKU it still has to be photographed with the dress.
• Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.

The headwrap is cut from the same lot as the garment and finished on all four edges; if it is a separate SKU it still has to be photographed with the dress.

A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

Options We Can Build To

• Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
• Detail variations on the a matching headwrap: scaled up, scaled down, or replaced with a plain panel at a lower price point.
• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.