Metallic Bronze Dashiki Print African Clothing
Searches for “metallic bronze dashiki print african clothing” rarely come from someone browsing a single piece. They come from buyers building a range: a boutique testing a new line, a wholesaler filling a container, or an established brand that needs a second source for a style it already sells.
In practical terms this is a dress in metallic wax built for women. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. A dress is the anchor of this category: one garment, one fit decision, and a silhouette that has to hold from the bust line to the hem without a waist seam to hide behind.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
- Block: dress, fitted on a real model at the middle size before grading.
- Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | metallic wax - swatch-approved, single lot for bulk |
| Silhouette | dress |
| Detail | clean finish, no added trim |
| Colourway | bronze |
| Lining | half-lined bodice |
| Closure | button placket |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 12-18 days including fabric booking |
| MOQ | 50 pcs for a sample order |
Where This Style Goes Wrong In Production
Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.
A dress is the anchor of this category: one garment, one fit decision, and a silhouette that has to hold from the bust line to the hem without a waist seam to hide behind.
Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.
Options We Can Build To
- Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
