Metallic Bronze African Two-Piece Set for Women
Most requests we quote against “metallic bronze african two piece set for women” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.
In practical terms this is a two-piece set in metallic wax built for women. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
- Block: two-piece set, fitted on a real model at the middle size before grading.
- Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | metallic wax - swatch-approved, single lot for bulk |
| Silhouette | two-piece set |
| Detail | clean finish, no added trim |
| Colourway | bronze |
| Lining | half-lined bodice |
| Closure | self-fabric tie with internal button |
| Size run | S-3XL graded to your spec sheet |
| Sample lead time | 12-18 days including fabric booking |
| MOQ | 300 pcs per style for a custom print |
Where This Style Goes Wrong In Production
Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.
A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
