Women's Metallic Bronze African Kaftan Boubou
The phrase “women's metallic bronze african kaftan boubou” reads like a styling note and behaves like a spec sheet. Once you unpack it, it names a cloth, a cut and a wearer - and those three decisions fix roughly eighty per cent of the cost before a single sample is cut.
In practical terms this is a kaftan boubou in metallic wax built for women. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
- Block: kaftan boubou, fitted on a real model at the middle size before grading.
- Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | metallic wax - swatch-approved, single lot for bulk |
| Silhouette | kaftan boubou |
| Detail | clean finish, no added trim |
| Colourway | bronze |
| Lining | unlined with bound seams |
| Closure | invisible centre-back zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 10-14 days after spec sign-off |
| MOQ | 300 pcs per style for a custom print |
Where This Style Goes Wrong In Production
Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.
A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
