Tribal Print African Two-Piece Set for Women
Most requests we quote against “tribal print african two piece set for women” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.
In practical terms this is a two-piece set in tribal print built for women. Tribal prints are usually rotary-printed onto a cotton or a cotton-blend base, which means the repeat is long and the colour is consistent across a lot but not across lots. A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: tribal print, weight and hand approved on a physical swatch, not on a screen.
- Block: two-piece set, fitted on a real model at the middle size before grading.
- Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | tribal print - swatch-approved, single lot for bulk |
| Silhouette | two-piece set |
| Detail | clean finish, no added trim |
| Colourway | your colourway, lab-dipped against a reference swatch |
| Lining | fully lined in matching polyester |
| Closure | self-fabric tie with internal button |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 7-10 days on stock cloth |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Tribal prints are usually rotary-printed onto a cotton or a cotton-blend base, which means the repeat is long and the colour is consistent across a lot but not across lots.
A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
- Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.