Women's Kente Traditional Print African Peplum Top and Skirt

Searches for “women's kente traditional print african peplum top and skirt” rarely come from someone browsing a single piece. They come from buyers building a range: a boutique testing a new line, a wholesaler filling a container, or an established brand that needs a second source for a style it already sells.

In practical terms this is a peplum top and skirt in kente cloth built for women. Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential. A peplum top and skirt is sold as a set but fitted as two garments. The peplum has to break at the natural waist on every size, and the skirt waistband has to match it exactly.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.

What Has To Be Specified

• Shell: kente cloth, weight and hand approved on a physical swatch, not on a screen.
• Block: peplum top and skirt, fitted on a real model at the middle size before grading.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential.

A peplum top and skirt is sold as a set but fitted as two garments. The peplum has to break at the natural waist on every size, and the skirt waistband has to match it exactly.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

The first sample usually passes on the mannequin and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before you approve anything.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Options We Can Build To

• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.