Women's Metallic Bronze African Clothing
Most requests we quote against “women's metallic bronze african clothing” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.
In practical terms this is a dress in metallic wax built for women. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. A dress is the anchor of this category: one garment, one fit decision, and a silhouette that has to hold from the bust line to the hem without a waist seam to hide behind.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
- Block: dress, fitted on a real model at the middle size before grading.
- Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | metallic wax - swatch-approved, single lot for bulk |
| Silhouette | dress |
| Detail | clean finish, no added trim |
| Colourway | bronze |
| Lining | half-lined bodice |
| Closure | button placket |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 7-10 days on stock cloth |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.
A dress is the anchor of this category: one garment, one fit decision, and a silhouette that has to hold from the bust line to the hem without a waist seam to hide behind.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
