Red and Yellow Kente Cloth African Clothing
When a buyer asks us to develop “red and yellow kente cloth african clothing”, the first conversation is never about price. It is about what the garment has to survive: a wedding season, a church calendar, a two-week festival run, or a shoot with eight hours of wear in it.
In practical terms this is a dress in kente cloth built for women. Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential. A dress is the anchor of this category: one garment, one fit decision, and a silhouette that has to hold from the bust line to the hem without a waist seam to hide behind.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: kente cloth, weight and hand approved on a physical swatch, not on a screen.
- Block: dress, fitted on a real model at the middle size before grading.
- Colour: yellow, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | kente cloth - swatch-approved, single lot for bulk |
| Silhouette | dress |
| Detail | clean finish, no added trim |
| Colourway | yellow |
| Lining | fully lined in matching polyester |
| Closure | concealed side zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 10-14 days after spec sign-off |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential.
A dress is the anchor of this category: one garment, one fit decision, and a silhouette that has to hold from the bust line to the hem without a waist seam to hide behind.
The first sample usually passes on the mannequin and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before you approve anything.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
