Tall Ladies Metallic Bronze African Dashiki Shirt

Searches for “tall ladies metallic bronze african dashiki shirt” rarely come from someone browsing a single piece. They come from buyers building a range: a boutique testing a new line, a wholesaler filling a container, or an established brand that needs a second source for a style it already sells.

In practical terms this is a shirt in metallic wax built for women. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. A shirt lives or dies on the collar and the placket. Both have to be cut with the print in mind, and the yoke is the panel that decides whether the motif lands on the shoulder.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.

What Has To Be Specified

• Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
• Block: shirt, fitted on a real model at the middle size before grading.
• Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.

A shirt lives or dies on the collar and the placket. Both have to be cut with the print in mind, and the yoke is the panel that decides whether the motif lands on the shoulder.

Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Options We Can Build To

• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.