Plus-Size Cream Beige Wax African Two-Piece Set

Searches for “plus size cream beige wax african two piece set” rarely come from someone browsing a single piece. They come from buyers building a range: a boutique testing a new line, a wholesaler filling a container, or an established brand that needs a second source for a style it already sells.

In practical terms this is a two-piece set in wax print built for plus-size buyers. Wax print behaves like a light cotton with a stiff finish. It takes sharp seams and top-stitching well, but the print repeat has to be planned against the pattern pieces before the marker is cut. A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.

Plus sizes are not a scaled-up straight size — the bust dart, the armhole and the waist drop all have to be redrawn, and the sample has to be fitted on a real body.

What Has To Be Specified

• Shell: wax print, weight and hand approved on a physical swatch, not on a screen.
• Block: two-piece set, fitted on a real model at the middle size before grading.
• Colour: cream, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Wax print behaves like a light cotton with a stiff finish. It takes sharp seams and top-stitching well, but the print repeat has to be planned against the pattern pieces before the marker is cut.

A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.

The first sample usually passes on the mannequin and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before you approve anything.

Options We Can Build To

• Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
• Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.