African Couples African Midi Dress Cold-Shoulder

Most requests we quote against “african couples african midi dress cold shoulder” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.

In practical terms this is a midi dress in ankara wax print built for couples. Ankara is a wax-printed cotton, normally 100-120 gsm. The hand is slightly crisp, so it holds a peplum, a pleat or a stand collar without much interlining, and it presses flat after a hot iron. A midi dress finishes between knee and ankle. It is the length that sells across markets because it works for church, office and evening with only a change of accessory.

Couple sets are bought as one purchase, so the two garments have to be packed together and sized in pairs.

What Has To Be Specified

• Shell: ankara wax print, weight and hand approved on a physical swatch, not on a screen.
• Block: midi dress, fitted on a real model at the middle size before grading.
• Detail: a cold-shoulder cut-out. A cold-shoulder cut-out needs a clean bound opening and a stay so the cut-out does not gape when the arm lifts.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Ankara is a wax-printed cotton, normally 100-120 gsm. The hand is slightly crisp, so it holds a peplum, a pleat or a stand collar without much interlining, and it presses flat after a hot iron.

A cold-shoulder cut-out needs a clean bound opening and a stay so the cut-out does not gape when the arm lifts.

A midi dress finishes between knee and ankle. It is the length that sells across markets because it works for church, office and evening with only a change of accessory.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Options We Can Build To

• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Detail variations on the a cold-shoulder cut-out: scaled up, scaled down, or replaced with a plain panel at a lower price point.
• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.