Plus-Size Classic Black Gold African Two-Piece Set

Most requests we quote against “plus size classic black gold african two piece set” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.

In practical terms this is a two-piece set in ankara wax print built for plus-size buyers. Ankara is a wax-printed cotton, normally 100-120 gsm. The hand is slightly crisp, so it holds a peplum, a pleat or a stand collar without much interlining, and it presses flat after a hot iron. A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.

Plus sizes are not a scaled-up straight size — the bust dart, the armhole and the waist drop all have to be redrawn, and the sample has to be fitted on a real body.

What Has To Be Specified

• Shell: ankara wax print, weight and hand approved on a physical swatch, not on a screen.
• Block: two-piece set, fitted on a real model at the middle size before grading.
• Colour: black, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Ankara is a wax-printed cotton, normally 100-120 gsm. The hand is slightly crisp, so it holds a peplum, a pleat or a stand collar without much interlining, and it presses flat after a hot iron.

A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

The first sample usually passes on the mannequin and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before you approve anything.

Options We Can Build To

• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.