Men's African Kaftan Boubou Layered Tier
Searches for “men's african kaftan boubou layered tier” rarely come from someone browsing a single piece. They come from buyers building a range: a boutique testing a new line, a wholesaler filling a container, or an established brand that needs a second source for a style it already sells.
In practical terms this is a kaftan boubou in ankara wax print built for men. Ankara is a wax-printed cotton, normally 100-120 gsm. The hand is slightly crisp, so it holds a peplum, a pleat or a stand collar without much interlining, and it presses flat after a hot iron. A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.
Menswear in this category is a different block entirely — a straighter shoulder, a longer body and a trouser rise that has nothing in common with the women's range.
What Has To Be Specified
- Shell: ankara wax print, weight and hand approved on a physical swatch, not on a screen.
- Block: kaftan boubou, fitted on a real model at the middle size before grading.
- Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | ankara wax print - swatch-approved, single lot for bulk |
| Silhouette | kaftan boubou |
| Detail | clean finish, no added trim |
| Colourway | your colourway, lab-dipped against a reference swatch |
| Lining | half-lined bodice |
| Closure | invisible centre-back zip |
| Size run | XS-2XL with a plus block |
| Sample lead time | 10-14 days after spec sign-off |
| MOQ | 300 pcs per style for a custom print |
Where This Style Goes Wrong In Production
Ankara is a wax-printed cotton, normally 100-120 gsm. The hand is slightly crisp, so it holds a peplum, a pleat or a stand collar without much interlining, and it presses flat after a hot iron.
A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.
Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.
Options We Can Build To
- Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
- Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
