Tall Ladies Metallic Bronze African a Line Dress
Most requests we quote against “tall ladies metallic bronze african a line dress” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.
In practical terms this is a A-line dress in metallic wax built for women. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. An A-line dress flares from the shoulder or the bust and clears the hip entirely. It is the most forgiving silhouette in the range and the easiest to grade across a wide size run.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
- Block: A-line dress, fitted on a real model at the middle size before grading.
- Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | metallic wax - swatch-approved, single lot for bulk |
| Silhouette | A-line dress |
| Detail | clean finish, no added trim |
| Colourway | bronze |
| Lining | half-lined bodice |
| Closure | invisible centre-back zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 10-14 days after spec sign-off |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.
An A-line dress flares from the shoulder or the bust and clears the hip entirely. It is the most forgiving silhouette in the range and the easiest to grade across a wide size run.
Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
- Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
