African Couples Metallic Bronze African Dashiki Shirt
Most requests we quote against “african couples metallic bronze african dashiki shirt” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.
In practical terms this is a shirt in metallic wax built for couples. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. A shirt lives or dies on the collar and the placket. Both have to be cut with the print in mind, and the yoke is the panel that decides whether the motif lands on the shoulder.
Couple sets are bought as one purchase, so the two garments have to be packed together and sized in pairs.
What Has To Be Specified
- Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
- Block: shirt, fitted on a real model at the middle size before grading.
- Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | metallic wax - swatch-approved, single lot for bulk |
| Silhouette | shirt |
| Detail | clean finish, no added trim |
| Colourway | bronze |
| Lining | half-lined bodice |
| Closure | self-fabric tie with internal button |
| Size run | S-3XL graded to your spec sheet |
| Sample lead time | 12-18 days including fabric booking |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.
A shirt lives or dies on the collar and the placket. Both have to be cut with the print in mind, and the yoke is the panel that decides whether the motif lands on the shoulder.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
