Tall Ladies Cream Beige Wax African Two-Piece Set
Searches for “tall ladies cream beige wax african two piece set” rarely come from someone browsing a single piece. They come from buyers building a range: a boutique testing a new line, a wholesaler filling a container, or an established brand that needs a second source for a style it already sells.
In practical terms this is a two-piece set in wax print built for women. Wax print behaves like a light cotton with a stiff finish. It takes sharp seams and top-stitching well, but the print repeat has to be planned against the pattern pieces before the marker is cut. A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: wax print, weight and hand approved on a physical swatch, not on a screen.
- Block: two-piece set, fitted on a real model at the middle size before grading.
- Colour: cream, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | wax print - swatch-approved, single lot for bulk |
| Silhouette | two-piece set |
| Detail | clean finish, no added trim |
| Colourway | cream |
| Lining | half-lined bodice |
| Closure | button placket |
| Size run | kids 2-12 or your own block |
| Sample lead time | 7-10 days on stock cloth |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Wax print behaves like a light cotton with a stiff finish. It takes sharp seams and top-stitching well, but the print repeat has to be planned against the pattern pieces before the marker is cut.
A two-piece set is bought as one look and worn as two garments, so both pieces have to stand alone. Matching the print across the join is the first decision, not the last.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.