Kids and Teens Kente Traditional Print African Jumpsuit
Most requests we quote against “kids and teens kente traditional print african jumpsuit” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.
In practical terms this is a jumpsuit in kente cloth built for kids. Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential. A jumpsuit is a fit problem before it is a style problem: torso length, crotch depth and rise all have to be right at the same time, and each of them grades differently.
Kids' sizing has to pass a safety review as well as a fit review, which means trims, cords and small parts all need a documented pull test.
What Has To Be Specified
- Shell: kente cloth, weight and hand approved on a physical swatch, not on a screen.
- Block: jumpsuit, fitted on a real model at the middle size before grading.
- Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | kente cloth - swatch-approved, single lot for bulk |
| Silhouette | jumpsuit |
| Detail | clean finish, no added trim |
| Colourway | your colourway, lab-dipped against a reference swatch |
| Lining | half-lined bodice |
| Closure | button placket |
| Size run | S-3XL graded to your spec sheet |
| Sample lead time | 12-18 days including fabric booking |
| MOQ | 50 pcs for a sample order |
Where This Style Goes Wrong In Production
Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential.
A jumpsuit is a fit problem before it is a style problem: torso length, crotch depth and rise all have to be right at the same time, and each of them grades differently.
The first sample usually passes on the mannequin and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before you approve anything.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Options We Can Build To
- Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
- Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
