Tall Ladies Kente Traditional Print African Kaftan Boubou

Most requests we quote against “tall ladies kente traditional print african kaftan boubou” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.

In practical terms this is a kaftan boubou in kente cloth built for women. Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential. A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.

What Has To Be Specified

• Shell: kente cloth, weight and hand approved on a physical swatch, not on a screen.
• Block: kaftan boubou, fitted on a real model at the middle size before grading.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential.

A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.

The first sample usually passes on the mannequin and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before you approve anything.

The first sample usually passes on the mannequin and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before you approve anything.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

Options We Can Build To

• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Packing: flat-fold with tissue, hanger-ready, or individual polybag with a branded insert.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.