Plus-Size Dashiki Print African Kaftan Boubou

“plus size dashiki print african kaftan boubou” maps to a reasonably specific garment in production terms, and that is what makes the phrase useful. In four or five words it tells a factory the silhouette, the cloth family and the occasion.

In practical terms this is a kaftan boubou in dashiki print built for plus-size buyers. Dashiki print is a large-scale motif, so the panel layout is a design decision, not a cutting detail. Most buyers lock the motif placement on the sample and freeze the marker after approval. A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.

Plus sizes are not a scaled-up straight size — the bust dart, the armhole and the waist drop all have to be redrawn, and the sample has to be fitted on a real body.

What Has To Be Specified

• Shell: dashiki print, weight and hand approved on a physical swatch, not on a screen.
• Block: kaftan boubou, fitted on a real model at the middle size before grading.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Dashiki print is a large-scale motif, so the panel layout is a design decision, not a cutting detail. Most buyers lock the motif placement on the sample and freeze the marker after approval.

A kaftan boubou is a wide, straight body with a generous sweep and a neckline opening rather than a fitted closure. The fit lives in the shoulder and the neck drop; everything below that is volume.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

Options We Can Build To

• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
• Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.