George Fabric African Clothing Suit Blazer

Most requests we quote against “george fabric african clothing suit blazer” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.

In practical terms this is a blazer in george fabric built for women. George is a heavy, high-sheen woven used for formal Igbo and Delta ceremonial wear. The weight is the point: it holds a wide sleeve and a structured shoulder without any help from interfacing. A structured blazer is a tailoring build — canvas or fusible, a roll line, a shoulder pad and a sleeve that hangs clean. In African print it is also a pattern-matching exercise.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.

What Has To Be Specified

• Shell: george fabric, weight and hand approved on a physical swatch, not on a screen.
• Block: blazer, fitted on a real model at the middle size before grading.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

George is a heavy, high-sheen woven used for formal Igbo and Delta ceremonial wear. The weight is the point: it holds a wide sleeve and a structured shoulder without any help from interfacing.

A structured blazer is a tailoring build — canvas or fusible, a roll line, a shoulder pad and a sleeve that hangs clean. In African print it is also a pattern-matching exercise.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Options We Can Build To

• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.