Women's Fall Winter 2026 Metallic Wax African Suit Blazer

When a buyer asks us to develop “women's fall winter 2026 metallic wax african suit blazer”, the first conversation is never about price. It is about what the garment has to survive: a wedding season, a church calendar, a two-week festival run, or a shoot with eight hours of wear in it.

In practical terms this is a blazer in wax print built for women, scheduled against fall/winter 2026. Wax print behaves like a light cotton with a stiff finish. It takes sharp seams and top-stitching well, but the print repeat has to be planned against the pattern pieces before the marker is cut. A structured blazer is a tailoring build — canvas or fusible, a roll line, a shoulder pad and a sleeve that hangs clean. In African print it is also a pattern-matching exercise.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container. Fall/winter 2026 pieces carry a heavier shell and a lining, which adds a lining supplier to the critical path alongside the shell fabric.

What Has To Be Specified

• Shell: wax print, weight and hand approved on a physical swatch, not on a screen.
• Block: blazer, fitted on a real model at the middle size before grading.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Wax print behaves like a light cotton with a stiff finish. It takes sharp seams and top-stitching well, but the print repeat has to be planned against the pattern pieces before the marker is cut.

A structured blazer is a tailoring build — canvas or fusible, a roll line, a shoulder pad and a sleeve that hangs clean. In African print it is also a pattern-matching exercise.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

Options We Can Build To

• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
• Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.