Women's All Season Kente Cloth African Midi Dress
Searches for “women's all season kente cloth african midi dress” rarely come from someone browsing a single piece. They come from buyers building a range: a boutique testing a new line, a wholesaler filling a container, or an established brand that needs a second source for a style it already sells.
In practical terms this is a midi dress in kente cloth built for women, scheduled against all-season programmes. Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential. A midi dress finishes between knee and ankle. It is the length that sells across markets because it works for church, office and evening with only a change of accessory.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container. An all-season programme only holds together if the shell is a stable, repeatable base cloth rather than a seasonal novelty.
What Has To Be Specified
- Shell: kente cloth, weight and hand approved on a physical swatch, not on a screen.
- Block: midi dress, fitted on a real model at the middle size before grading.
- Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | kente cloth - swatch-approved, single lot for bulk |
| Silhouette | midi dress |
| Detail | clean finish, no added trim |
| Colourway | your colourway, lab-dipped against a reference swatch |
| Lining | half-lined bodice |
| Closure | button placket |
| Size run | XS-2XL with a plus block |
| Sample lead time | 12-18 days including fabric booking |
| MOQ | 50 pcs for a sample order |
Where This Style Goes Wrong In Production
Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential.
A midi dress finishes between knee and ankle. It is the length that sells across markets because it works for church, office and evening with only a change of accessory.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.