Women's All Season Kente Cloth African Suit Blazer

“women's all season kente cloth african suit blazer” maps to a reasonably specific garment in production terms, and that is what makes the phrase useful. In four or five words it tells a factory the silhouette, the cloth family and the occasion.

In practical terms this is a blazer in kente cloth built for women, scheduled against all-season programmes. Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential. A structured blazer is a tailoring build — canvas or fusible, a roll line, a shoulder pad and a sleeve that hangs clean. In African print it is also a pattern-matching exercise.

The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container. An all-season programme only holds together if the shell is a stable, repeatable base cloth rather than a seasonal novelty.

What Has To Be Specified

• Shell: kente cloth, weight and hand approved on a physical swatch, not on a screen.
• Block: blazer, fitted on a real model at the middle size before grading.
• Colour: name the colourway and give a reference swatch. “African print” is not a colour; a lab dip checked under D65 and TL84 is.
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Kente is a hand-woven strip cloth, so width is fixed by the loom and the strips have to be joined. Weight and colour intensity vary from bolt to bolt, which makes a single-lot buy essential.

A structured blazer is a tailoring build — canvas or fusible, a roll line, a shoulder pad and a sleeve that hangs clean. In African print it is also a pattern-matching exercise.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

Print placement is the quiet cost driver. Every seam that crosses the motif has to be planned in the marker, and that planning has to be repeated for each size.

Options We Can Build To

• Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.