Welcome to Bafinasa official website!

Spring Summer Printed Chiffon Sundress

Source:News / Time:2026-11-19

This is a style that rewards a patient first sample. Every shortcut taken on the block comes back later as a return, a re-cut or a discount. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. A Spring Summer Printed Chiffon Sundress can be made at almost any price. What changes is how long it keeps its line and how much of the making shows. Most of the money in a Spring Summer Printed Chiffon Sundress sits in three places: the cloth, the shoulder seam, and the labour that keeps the side seam flat after pressing.

Under 200 gsm, plan to interface the shoulder seam. Without it, the seam ridge shows through at the first press. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. We start with chiffon on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Ask for weight in gsm and composition as percentages, not trade names. Trade names do not travel well between mills.

Structure and seams

Most of the handwork sits in a handful of steps, and each one has a right order. French seams are worth the extra minute. An overlocked edge shows as a dark line through a light chiffon. Steam is used lightly. Too much heat flattens the volume the buyer is paying for. Chiffon moves on the cutting table. Lay it flat for thirty minutes before cutting, or every panel will be a different length.

The hem is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample. Check the hem after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.

For Chiffon Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping. Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample.

What goes on the spec sheet

Shellchiffon, swatch-approved, one dye lot for bulk
Bodychiffon dress
Lengthconfirmed on the wearer, in her shoes
Colourwaybuyer colourway, lab-dipped under two lights
Lininghalf lined to the hip
Closureinvisible centre-back zip
Size run34-44 with a regional grade
Sample lead time12-18 days after spec sign-off
MOQ150 pcs per style

What to check before bulk

  • Lining sewn to the same length as the shell, so the two drag each other.
  • Heavy needle thread showing through the shell under shop lights.
  • Cutting before the cloth relaxes, so the finished hem is uneven.
  • A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem. Pressing is a step, not a rescue. A seam pressed open before the next one is sewn behaves differently from one pressed at the end.

Changes we can make at sample stage

  • Print or solid, with placement controlled at the front panel.
  • Layer count at the skirt: one, two, or three tiers.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.

The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder.

A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together. Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top