All Season Printed Chiffon Tunic Top
The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the collar. Most of the money in a All Season Printed Chiffon Tunic Top sits in three places: the cloth, the collar, and the labour that keeps the placket flat after pressing.
Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes. We start with chiffon on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes.
How it is built
The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Cuffs are cut in pairs from the same panel. A mismatched pair is the first thing an inspector sees. On light cloth, ease the sleeve head rather than gathering it. The sleeve should hold shape without puckers.
We keep the collar as its own pattern piece so it can be changed without re-cutting the body. When the brief names the collar, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain.
For Chiffon Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the collar.
What goes on the spec sheet
| Shell | chiffon, swatch-approved, one dye lot for bulk |
| Body | blouse |
| Length | confirmed on the wearer, in her shoes |
| Colourway | buyer colourway, lab-dipped under two lights |
| Lining | no lining; faced yoke, cuffs and placket |
| Closure | concealed side zip |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 300 pcs per style |
The places this usually goes wrong
- Sleeve gathered rather than eased, producing puckers that show on a plain cloth.
- Placket cut on the bias by accident, so it twists after washing.
- Collar fused too hard, giving a plastic edge that cannot be pressed into shape.
- Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
- Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder. Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem. In bulk the failures cluster: skipped stitches on the collar, shading between panels, and hems that go wavy after pressing.
Options on the table
- Collar: classic point, camp, band, or removable.
- Placket: full, half, hidden, or none with a keyhole opening.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.
- Shell swap: the same block in a lighter or heavier cloth, priced separately.
Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.
Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.