Welcome to Bafinasa official website!

Warm Weather Chiffon Blend Camisole

Source:News / Time:2026-11-19

Most of the money in a Warm Weather Chiffon Blend Camisole sits in three places: the cloth, the collar, and the labour that keeps the placket flat after pressing. It helps to separate what the customer sees from what the factory feels. The outside is chiffon, the inside is structure, and the two have to agree on the same sample. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch.

Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. Under 200 gsm, plan to interface the collar. Without it, the seam ridge shows through at the first press. For chiffon, order five to eight percent extra. Cutting around a shade band costs more than the cloth. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes.

Construction notes

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Shell buttons change the perceived price more than they change the cost. Decide early, because button size changes the placket width. Cuffs are cut in pairs from the same panel. A mismatched pair is the first thing an inspector sees. Set the placket before the collar. Two millimetres of shift at the button stand is visible.

Check the collar after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift. We keep the collar as its own pattern piece so it can be changed without re-cutting the body.

A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping. For Chiffon Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample.

Specification, item by item

Shellchiffon, swatch-approved, one dye lot for bulk
Bodyblouse
Lengthconfirmed on the wearer, in her shoes
Colourwaybuyer colourway, lab-dipped under two lights
Liningno lining; faced yoke, cuffs and placket
Closureinvisible centre-back zip
Size runXS-2XL plus a curve block
Sample lead time12-18 days after spec sign-off
MOQ100 pcs per colour

Where this style fails in production

  • Sleeve gathered rather than eased, producing puckers that show on a plain cloth.
  • Buttons sized to the sample rather than to the placket, so bulk splits the button stand.
  • Collar fused too hard, giving a plastic edge that cannot be pressed into shape.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.

In bulk the failures cluster: skipped stitches on the collar, shading between panels, and hems that go wavy after pressing. Lead time is normally 12 to 20 days for a first sample and 30 to 45 days for bulk, depending on stock cloth and handwork. Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered.

Customisation that does not break the price

  • Collar: classic point, camp, band, or removable.
  • Placket: full, half, hidden, or none with a keyhole opening.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.

The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder.

A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together. Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top