Welcome to Bafinasa official website!

Casual Spring Summer Printed Chiffon Camisole

Source:News / Time:2026-11-19

A Casual Spring Summer Printed Chiffon Camisole reads as a short brief until the pattern is cut, and the shape only holds when the collar, the placket and the hem allowance are settled together. Most of the money in a Casual Spring Summer Printed Chiffon Camisole sits in three places: the cloth, the collar, and the labour that keeps the placket flat after pressing. Nothing in this style is hard to sew. It is hard to sew consistently, which is a different problem and a more expensive one. Written down, the request is casual spring summer printed chiffon camisole: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish.

Under 200 gsm, plan to interface the collar. Without it, the seam ridge shows through at the first press. We start with chiffon on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Cloth decides more than the brief admits. The same block in a 180 gsm wool blend and a 260 gsm double knit produces two different garments, one for the office and one for the evening. For chiffon, order five to eight percent extra. Cutting around a shade band costs more than the cloth.

Where the shape comes from

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. On light cloth, ease the sleeve head rather than gathering it. The sleeve should hold shape without puckers. Cuffs are cut in pairs from the same panel. A mismatched pair is the first thing an inspector sees.

When the brief names the collar, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain. We keep the collar as its own pattern piece so it can be changed without re-cutting the body.

Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the collar. For Chiffon Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. On this style the difference between a good and a poor fit is usually two centimetres at the placket, not a redesign.

Specification, item by item

Shellchiffon, swatch-approved, one dye lot for bulk
Bodyblouse
Lengthconfirmed on the wearer, in her shoes
Colourwaybuyer colourway, lab-dipped under two lights
Liningno lining; faced yoke, cuffs and placket
Closurecovered button placket
Size runS-XL (4 sizes) for the test
Sample lead time10-14 days on stock cloth
MOQ300 pcs per style

The places this usually goes wrong

  • Collar fused too hard, giving a plastic edge that cannot be pressed into shape.
  • Sleeve gathered rather than eased, producing puckers that show on a plain cloth.
  • A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.

Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Pressing is a step, not a rescue. A seam pressed open before the next one is sewn behaves differently from one pressed at the end. In bulk the failures cluster: skipped stitches on the collar, shading between panels, and hems that go wavy after pressing.

Options on the table

  • Collar: classic point, camp, band, or removable.
  • Placket: full, half, hidden, or none with a keyhole opening.
  • Private label: woven label, care label and hangtag to your artwork.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.

The fit sample is where the pattern is corrected. Changes after this point cost time, not only money. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there.

Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top