Welcome to Bafinasa official website!

Warm Weather Double Layer Chiffon Sundress

Source:News / Time:2026-11-19

Written down, the request is warm weather double layer chiffon sundress: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish. Most of the money in a Warm Weather Double Layer Chiffon Sundress sits in three places: the cloth, the shoulder seam, and the labour that keeps the side seam flat after pressing. It helps to separate what the customer sees from what the factory feels. The outside is chiffon, the inside is structure, and the two have to agree on the same sample. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed.

For chiffon, order five to eight percent extra. Cutting around a shade band costs more than the cloth. Under 200 gsm, plan to interface the shoulder seam. Without it, the seam ridge shows through at the first press.

Structure and seams

Most of the handwork sits in a handful of steps, and each one has a right order. French seams are worth the extra minute. An overlocked edge shows as a dark line through a light chiffon. Hem with a narrow rolled edge. A wide hem pulls light cloth out of shape.

Check the hem after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift. We keep the hem as its own pattern piece so it can be changed without re-cutting the body.

Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the shoulder seam to move at different rates. On this style the difference between a good and a poor fit is usually two centimetres at the side seam, not a redesign. If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make.

Spec sheet, line by line

Shellchiffon, swatch-approved, one dye lot for bulk
Bodychiffon dress
Lengthconfirmed on the wearer, in her shoes
Colourwaybuyer colourway, lab-dipped under two lights
Liningfully lined, bagged hem
Closureinvisible centre-back zip
Size runS-3XL graded to your sheet
Sample lead time10-14 days on stock cloth
MOQ150 pcs per style

Failure points worth designing out

  • Lining sewn to the same length as the shell, so the two drag each other.
  • Over-pressed seams that kill the drape and make the dress look flat.
  • Cutting before the cloth relaxes, so the finished hem is uneven.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.

Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder. Pressing is a step, not a rescue. A seam pressed open before the next one is sewn behaves differently from one pressed at the end. Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem.

What we can change for you

  • Sleeve: flutter, cap, or long with a cuff.
  • Print or solid, with placement controlled at the front panel.
  • Lining: full, to the knee, or a separate slip.
  • Layer count at the skirt: one, two, or three tiers.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.

Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.

A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed. If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top