Welcome to Bafinasa official website!

Women's Organza Chiffon Tunic Top

Source:News / Time:2026-11-19

It helps to separate what the customer sees from what the factory feels. The outside is chiffon, the inside is structure, and the two have to agree on the same sample. Written down, the request is women's organza chiffon tunic top: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch.

For chiffon, order five to eight percent extra. Cutting around a shade band costs more than the cloth. Cloth decides more than the brief admits. The same block in a 180 gsm wool blend and a 260 gsm double knit produces two different garments, one for the office and one for the evening. We start with chiffon on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Under 200 gsm, plan to interface the collar. Without it, the seam ridge shows through at the first press.

Structure and seams

Most of the handwork sits in a handful of steps, and each one has a right order. Shell buttons change the perceived price more than they change the cost. Decide early, because button size changes the placket width. Cuffs are cut in pairs from the same panel. A mismatched pair is the first thing an inspector sees. Set the placket before the collar. Two millimetres of shift at the button stand is visible.

If the collar is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one. Check the collar after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.

Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the collar. Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the collar to move at different rates. Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample.

Spec sheet, line by line

Shellchiffon, swatch-approved, one dye lot for bulk
Bodyblouse
Lengthconfirmed on the wearer, in her shoes
Colourwaybuyer colourway, lab-dipped under two lights
Liningno lining; faced yoke, cuffs and placket
Closureinvisible centre-back zip
Size run34-44 with a regional grade
Sample lead time10-14 days on stock cloth
MOQ300 pcs per style

What to check before bulk

  • Placket cut on the bias by accident, so it twists after washing.
  • Sleeve gathered rather than eased, producing puckers that show on a plain cloth.
  • Buttons sized to the sample rather than to the placket, so bulk splits the button stand.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.

AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule. Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem.

What we can change for you

  • Collar: classic point, camp, band, or removable.
  • Cuff: buttoned, elasticated, or turned back.
  • Placket: full, half, hidden, or none with a keyhole opening.
  • Back: plain, box pleat, or yoke with a loop.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.

The fit sample is where the pattern is corrected. Changes after this point cost time, not only money. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth.

Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top