Welcome to Bafinasa official website!

Wholesale Gold Corset Cocktail Midi Dress for Party

Source:News / Time:2026-11-19

It helps to separate what the customer sees from what the factory feels. The outside is structured crepe, jacquard or satin in gold, the inside is structure, and the two have to agree on the same sample. Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the bodice seam.

Under 200 gsm, plan to interface the bodice seam. Without it, the seam ridge shows through at the first press. Cloth decides more than the brief admits. The same block in a 180 gsm wool blend and a 260 gsm double knit produces two different garments, one for the office and one for the evening. Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes.

Construction notes

Most of the handwork sits in a handful of steps, and each one has a right order. Decoration goes on after fitting. Beads and appliques change the weight of a panel and the way it hangs. The zip is set at the back with a facing that stays flat, and the seam is tapered so it does not widen at the hip. The bodice is fitted at the middle size with real underwear, then graded without adding ease at the bust.

Check the bodice seam after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift. When the brief names the bodice seam, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain.

A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping. On this style the difference between a good and a poor fit is usually two centimetres at the waist seam, not a redesign. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the bodice seam.

Specification, item by item

Shella structured crepe, a jacquard, or a satin backed with soft interfacing, swatch-approved, one dye lot for bulk
Bodycocktail midi dress
Lengthmidi
Colourwaygold
Liningfully lined, bagged hem
Closurestretch panel, no zip
Size runS-3XL graded to your sheet
Sample lead time12-18 days after spec sign-off
MOQ100 pcs per colour

What to check before bulk

  • Decoration applied before fitting, so the panel cannot be adjusted without removing it.
  • Back hem one centimetre shorter than the front, visible as soon as the wearer walks.
  • A close fit approved on the form, then rejected on a body because the armhole was cut too high.
  • A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.

Set stitch density at 12 to 14 per inch on woven seams and check it at the machine, not on the finished garment. Schedule an in-line check after the bodice seam goes on. Catching a rotation there costs minutes; catching it at final costs the order. Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth.

Changes we can make at sample stage

  • Sleeve: sleeveless, cap, or detachable straps.
  • Decoration: none, tonal embroidery, or a beaded motif at the waist.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
  • Private label: woven label, care label and hangtag to your artwork.

Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.

If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top