Welcome to Bafinasa official website!

Emerald Green Wrap Cocktail Midi Dress for Women

Source:News / Time:2026-11-19

It helps to separate what the customer sees from what the factory feels. The outside is structured crepe, jacquard or satin in green, the inside is structure, and the two have to agree on the same sample. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. Written down, the request is emerald green wrap cocktail midi dress for women: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish.

For structured crepe, jacquard or satin, order five to eight percent extra. Cutting around a shade band costs more than the cloth. Cloth decides more than the brief admits. The same block in a 180 gsm wool blend and a 260 gsm double knit produces two different garments, one for the office and one for the evening. We start with structured crepe, jacquard or satin on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Under 200 gsm, plan to interface the bodice seam. Without it, the seam ridge shows through at the first press.

Structure and seams

The build follows the same order on every size. These are the steps where the shape is won or lost. The bodice is fitted at the middle size with real underwear, then graded without adding ease at the bust. Decoration goes on after fitting. Beads and appliques change the weight of a panel and the way it hangs. A midi length is measured at the front and back separately. The back hem usually needs an extra centimetre.

The wrap is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample. When the brief names the wrap, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain.

We fit the middle size on a live model, then check the smallest and the largest on real bodies, not on the form. Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the bodice seam to move at different rates. For Cocktail Midi Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium.

Specification, item by item

Shella structured crepe, a jacquard, or a satin backed with soft interfacing, swatch-approved, one dye lot for bulk
Bodycocktail midi dress
Lengthmidi
Colourwaygreen
Liningunlined with faced seams
Closureinvisible centre-back zip
Size run34-44 with a regional grade
Sample lead time10-14 days on stock cloth
MOQ150 pcs per style

The places this usually goes wrong

  • Decoration applied before fitting, so the panel cannot be adjusted without removing it.
  • Topstitch showing through a satin shell after pressing.
  • A close fit approved on the form, then rejected on a body because the armhole was cut too high.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
  • A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.

Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth. Set stitch density at 12 to 14 per inch on woven seams and check it at the machine, not on the finished garment. AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule.

Changes we can make at sample stage

  • Back: centre zip, lace-up, or a covered button placket.
  • Decoration: none, tonal embroidery, or a beaded motif at the waist.
  • Neckline: square, V, or one shoulder with a faced edge.
  • Sleeve: sleeveless, cap, or detachable straps.
  • Private label: woven label, care label and hangtag to your artwork.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.

The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.

Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production. Confirm the ship window against the mill calendar and the holiday shutdown before the purchase order is signed.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top