Welcome to Bafinasa official website!

Best for Women Burgundy Maxi Casual Dresses

Source:News / Time:2026-11-19

It helps to separate what the customer sees from what the factory feels. The outside is viscose crepe or cotton blend in burgundy, the inside is structure, and the two have to agree on the same sample. Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the waist seam.

Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet. We start with viscose crepe or cotton blend on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes.

Where the shape comes from

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. For lined skirts, bag the hem or face it, and say which. The two finishes behave differently in packing. Panels are cut on the same grain. A skirt panel cut slightly off shows as a twist at the hem after a day of wear. Slits are faced and bar-tacked at the top. An unbar-tacked slit opens within a week.

We keep the hem as its own pattern piece so it can be changed without re-cutting the body. The hem is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample.

Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the waist seam to move at different rates. If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make. On this style the difference between a good and a poor fit is usually two centimetres at the side seam, not a redesign.

Specification, item by item

Shella viscose crepe or a 110 gsm cotton blend with some weight, swatch-approved, one dye lot for bulk
Bodymaxi dress
Lengthmaxi
Colourwayburgundy
Lininghalf lined to the hip
Closurestretch panel, no zip
Size runS-XL (4 sizes) for the test
Sample lead time12-18 days after spec sign-off
MOQ150 pcs per style

The places this usually goes wrong

  • Waist seam un-interfaced, so the skirt drags it down at the centre front.
  • Hem pressed with too much steam, leaving a wavy edge that cannot be corrected.
  • Length measured on the form, so bulk is short on a real body.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
  • A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.

Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth. Schedule an in-line check after the waist seam goes on. Catching a rotation there costs minutes; catching it at final costs the order. Set stitch density at 12 to 14 per inch on woven seams and check it at the machine, not on the finished garment.

Customisation that does not break the price

  • Lining: full, half, or none.
  • Slit height and position.
  • Waist: fixed, elasticated, or drawstring.
  • Length in three steps, priced per step.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.

Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money.

Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production. A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top