Burgundy Long Sleeve Casual Dresses for Women
A Burgundy Long Sleeve Casual Dresses for Women can be made at almost any price. What changes is how long it keeps its line and how much of the making shows. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. This is a style that rewards a patient first sample. Every shortcut taken on the block comes back later as a return, a re-cut or a discount. Most of the money in a Burgundy Long Sleeve Casual Dresses for Women sits in three places: the cloth, the shoulder seam, and the labour that keeps the side seam flat after pressing.
Ask for weight in gsm and composition as percentages, not trade names. Trade names do not travel well between mills. Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded. Approve colour under two lights, D65 and warm indoor. A black that reads neutral in an office can read green under shop lighting.
Where the shape comes from
The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Jersey is cut in a single layer in the direction of the grain. Two layers can shift and twist the hem. Necklines are finished with a self-fabric binding or a rib, depending on how much recovery the cloth has.
The long sleeve reads as a design choice and behaves as a construction one. It changes the seam order, and sometimes the closure. We keep the long sleeve as its own pattern piece so it can be changed without re-cutting the body.
Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the shoulder seam. For Casual Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. On this style the difference between a good and a poor fit is usually two centimetres at the side seam, not a redesign.
The sheet we need before costing
| Shell | a 160 to 220 gsm cotton jersey or a washed poplin, swatch-approved, one dye lot for bulk |
| Body | casual dress |
| Length | confirmed on the wearer, in her shoes |
| Colourway | burgundy |
| Lining | bodice lined, skirt lined |
| Closure | stretch panel, no zip |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 150 pcs per style |
The places this usually goes wrong
- Topstitch too tight on a knit, causing the seam to break.
- Shrinkage tested on a different dye lot, so the first wash shortens the dress.
- Jersey cut in two layers, giving a hem that twists after washing.
- The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
- Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Lead time is normally 12 to 20 days for a first sample and 30 to 45 days for bulk, depending on stock cloth and handwork. In bulk the failures cluster: skipped stitches on the shoulder seam, shading between panels, and hems that go wavy after pressing.
What we can change for you
- Length: above the knee, at the knee, or midi.
- Sleeve: short, cap, or long with a rib cuff.
- Print placement or solid with a contrast binding.
- Pockets: none, side seam, or patch.
- Shell swap: the same block in a lighter or heavier cloth, priced separately.
- Private label: woven label, care label and hangtag to your artwork.
Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth.
If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first. Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.