Welcome to Bafinasa official website!

Sage Green Maxi Casual Dresses for Women

Source:News / Time:2026-11-19

Most of the money in a Sage Green Maxi Casual Dresses for Women sits in three places: the cloth, the waist seam, and the labour that keeps the side seam flat after pressing. There is nothing experimental about this garment. The difficulty is discipline: the same four measurements decide fit on every size, and they have to be printed, not remembered. It helps to separate what the customer sees from what the factory feels. The outside is viscose crepe or cotton blend in green, the inside is structure, and the two have to agree on the same sample. A Sage Green Maxi Casual Dresses for Women can be made at almost any price. What changes is how long it keeps its line and how much of the making shows.

Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet. Approve colour under two lights, D65 and warm indoor. A black that reads neutral in an office can read green under shop lighting. The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded.

Where the shape comes from

Most of the handwork sits in a handful of steps, and each one has a right order. For lined skirts, bag the hem or face it, and say which. The two finishes behave differently in packing. Slits are faced and bar-tacked at the top. An unbar-tacked slit opens within a week. A maxi is a length decision before it is a style decision. Confirm the finished length on the wearer, in her shoes.

We keep the hem as its own pattern piece so it can be changed without re-cutting the body. Check the hem after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.

Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the waist seam. For Casual Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. On this style the difference between a good and a poor fit is usually two centimetres at the side seam, not a redesign.

What goes on the spec sheet

Shella viscose crepe or a 110 gsm cotton blend with some weight, swatch-approved, one dye lot for bulk
Bodymaxi dress
Lengthmaxi
Colourwaygreen
Liningfully lined, bagged hem
Closurestretch panel, no zip
Size runS-3XL graded to your sheet
Sample lead time12-18 days after spec sign-off
MOQ50 pcs sample order

Failure points worth designing out

  • Hem pressed with too much steam, leaving a wavy edge that cannot be corrected.
  • Length measured on the form, so bulk is short on a real body.
  • Waist seam un-interfaced, so the skirt drags it down at the centre front.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.

Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule. Pressing is a step, not a rescue. A seam pressed open before the next one is sewn behaves differently from one pressed at the end.

Changes we can make at sample stage

  • Length in three steps, priced per step.
  • Waist: fixed, elasticated, or drawstring.
  • Slit height and position.
  • Lining: full, half, or none.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.

Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth. The proto is usually made in stock cloth. Do not judge the hand from it; judge the line.

If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top