Welcome to Bafinasa official website!

Casual Party Dress Accessories for

Source:News / Time:2026-11-19

Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. We see this style in two versions. One is built to hit a price, the other to keep its shape for three seasons. They differ by about fifteen percent in cost and by a great deal in what comes back. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. This is a style that rewards a patient first sample. Every shortcut taken on the block comes back later as a return, a re-cut or a discount.

Request a shrink test on the actual dye lot. Half a percent across a long hem is visible to the customer and invisible on the sheet. For cotton jersey or washed poplin, order five to eight percent extra. Cutting around a shade band costs more than the cloth. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes.

How it is built

The build follows the same order on every size. These are the steps where the shape is won or lost. Pockets are a design decision here. They add use, but they also pull the skirt if the opening is too shallow. This style is often worn without a slip, so check the inside seam finishes against light. Jersey is cut in a single layer in the direction of the grain. Two layers can shift and twist the hem.

Check the pocket opening after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift. If the pocket opening is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one.

Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the shoulder seam to move at different rates. A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the shoulder seam.

Spec sheet, line by line

Shella 160 to 220 gsm cotton jersey or a washed poplin, swatch-approved, one dye lot for bulk
Bodycasual dress
Lengthconfirmed on the wearer, in her shoes
Colourwaybuyer colourway, lab-dipped under two lights
Liningunlined with faced seams
Closurecovered button placket
Size runS-XL (4 sizes) for the test
Sample lead time10-14 days on stock cloth
MOQ50 pcs sample order

What to check before bulk

  • Jersey cut in two layers, giving a hem that twists after washing.
  • Shrinkage tested on a different dye lot, so the first wash shortens the dress.
  • Topstitch too tight on a knit, causing the seam to break.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
  • Pressing decides the finish. A needle mark on a light cloth stays after QC, whatever the inspector does.

In bulk the failures cluster: skipped stitches on the shoulder seam, shading between panels, and hems that go wavy after pressing. Schedule an in-line check after the shoulder seam goes on. Catching a rotation there costs minutes; catching it at final costs the order.

Changes we can make at sample stage

  • Pockets: none, side seam, or patch.
  • Length: above the knee, at the knee, or midi.
  • Sleeve: short, cap, or long with a rib cuff.
  • Print placement or solid with a contrast binding.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.

The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth.

Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top