Welcome to Bafinasa official website!

Women's Muslin Loose Fit Casual Above Knee Dress

Source:News / Time:2026-11-19

Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the shoulder seam. Most of the money in a Women's Muslin Loose Fit Casual Above Knee Dress sits in three places: the cloth, the shoulder seam, and the labour that keeps the side seam flat after pressing. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed.

Under 200 gsm, plan to interface the shoulder seam. Without it, the seam ridge shows through at the first press. Request a shrink test on the actual dye lot. Half a percent across a long hem is visible to the customer and invisible on the sheet. Lining is not a detail. A 65 to 75 gsm taffeta slides over the cloth; a cheap lining grabs it and the garment climbs when the wearer walks. Approve colour under two lights, D65 and warm indoor. A black that reads neutral in an office can read green under shop lighting.

Structure and seams

The build follows the same order on every size. These are the steps where the shape is won or lost. Stitch with a stretch needle and a light press. A heavy hand leaves waves that show on a plain colour. Jersey is cut in a single layer in the direction of the grain. Two layers can shift and twist the hem. A casual dress has to survive a washing machine. Confirm shrinkage on the actual lot before the pattern is final.

Check the pocket opening after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift. When the brief names the pocket opening, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain.

Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the shoulder seam to move at different rates. A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the shoulder seam.

What goes on the spec sheet

Shella 160 to 220 gsm cotton jersey or a washed poplin, swatch-approved, one dye lot for bulk
Bodycasual dress
Lengthconfirmed on the wearer, in her shoes
Colourwaybuyer colourway, lab-dipped under two lights
Liningunlined with faced seams
Closureconcealed side zip
Size runXS-2XL plus a curve block
Sample lead time10-14 days on stock cloth
MOQ150 pcs per style

Where this style fails in production

  • Pocket bags cut too short, so they pull the skirt out at the hip.
  • Shrinkage tested on a different dye lot, so the first wash shortens the dress.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
  • Pressing decides the finish. A needle mark on a light cloth stays after QC, whatever the inspector does.

AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule. Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder. Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth.

What we can change for you

  • Pockets: none, side seam, or patch.
  • Length: above the knee, at the knee, or midi.
  • Sleeve: short, cap, or long with a rib cuff.
  • Print placement or solid with a contrast binding.
  • Private label: woven label, care label and hangtag to your artwork.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.

The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth.

If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top