Welcome to Bafinasa official website!

Women's Corduroy T Shirt Casual Midi Dress

Source:News / Time:2026-11-19

This is a style that rewards a patient first sample. Every shortcut taken on the block comes back later as a return, a re-cut or a discount. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. We see this style in two versions. One is built to hit a price, the other to keep its shape for three seasons. They differ by about fifteen percent in cost and by a great deal in what comes back. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch.

Approve colour under two lights, D65 and warm indoor. A black that reads neutral in an office can read green under shop lighting. The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded. Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. Ask for weight in gsm and composition as percentages, not trade names. Trade names do not travel well between mills.

Structure and seams

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Cuffs are cut in pairs from the same panel. A mismatched pair is the first thing an inspector sees. Set the placket before the collar. Two millimetres of shift at the button stand is visible. Shell buttons change the perceived price more than they change the cost. Decide early, because button size changes the placket width.

When the brief names the collar, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain. If the collar is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one.

If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make. For Casual Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. We fit the middle size on a live model, then check the smallest and the largest on real bodies, not on the form.

The sheet we need before costing

Shellcorduroy, swatch-approved, one dye lot for bulk
Bodyblouse
Lengthmidi
Colourwaybuyer colourway, lab-dipped under two lights
Liningno lining; faced yoke, cuffs and placket
Closureinvisible centre-back zip
Size runXS-2XL plus a curve block
Sample lead time10-14 days on stock cloth
MOQ300 pcs per style

The places this usually goes wrong

  • Sleeve gathered rather than eased, producing puckers that show on a plain cloth.
  • Buttons sized to the sample rather than to the placket, so bulk splits the button stand.
  • Collar fused too hard, giving a plastic edge that cannot be pressed into shape.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.

Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder. Pressing is a step, not a rescue. A seam pressed open before the next one is sewn behaves differently from one pressed at the end. Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem.

Changes we can make at sample stage

  • Collar: classic point, camp, band, or removable.
  • Back: plain, box pleat, or yoke with a loop.
  • Placket: full, half, hidden, or none with a keyhole opening.
  • Cuff: buttoned, elasticated, or turned back.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.

Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The proto is usually made in stock cloth. Do not judge the hand from it; judge the line.

A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together. A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top