Welcome to Bafinasa official website!

Olive Green Effortless Casual Maxi Casual Dress

Source:News / Time:2026-11-19

A Olive Green Effortless Casual Maxi Casual Dress can be made at almost any price. What changes is how long it keeps its line and how much of the making shows. It helps to separate what the customer sees from what the factory feels. The outside is viscose crepe or cotton blend in green, the inside is structure, and the two have to agree on the same sample. There is nothing experimental about this garment. The difficulty is discipline: the same four measurements decide fit on every size, and they have to be printed, not remembered. Most of the money in a Olive Green Effortless Casual Maxi Casual Dress sits in three places: the cloth, the waist seam, and the labour that keeps the side seam flat after pressing.

Under 200 gsm, plan to interface the waist seam. Without it, the seam ridge shows through at the first press. Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet. Lining is not a detail. A 65 to 75 gsm taffeta slides over the cloth; a cheap lining grabs it and the garment climbs when the wearer walks. Approve colour under two lights, D65 and warm indoor. A black that reads neutral in an office can read green under shop lighting.

How it is built

The build follows the same order on every size. These are the steps where the shape is won or lost. The waist seam carries the weight of the skirt. Interface it lightly or the seam sinks under its own load. Slits are faced and bar-tacked at the top. An unbar-tacked slit opens within a week. Panels are cut on the same grain. A skirt panel cut slightly off shows as a twist at the hem after a day of wear.

When the brief names the hem, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain. Check the hem after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.

On this style the difference between a good and a poor fit is usually two centimetres at the side seam, not a redesign. Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the waist seam to move at different rates. If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make.

Spec sheet, line by line

Shella viscose crepe or a 110 gsm cotton blend with some weight, swatch-approved, one dye lot for bulk
Bodymaxi dress
Lengthmaxi
Colourwaygreen
Liningfully lined, bagged hem
Closureinvisible centre-back zip
Size run34-44 with a regional grade
Sample lead time12-18 days after spec sign-off
MOQ300 pcs per style

What to check before bulk

  • Waist seam un-interfaced, so the skirt drags it down at the centre front.
  • Length measured on the form, so bulk is short on a real body.
  • Hem pressed with too much steam, leaving a wavy edge that cannot be corrected.
  • A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
  • Pressing decides the finish. A needle mark on a light cloth stays after QC, whatever the inspector does.

Pressing is a step, not a rescue. A seam pressed open before the next one is sewn behaves differently from one pressed at the end. Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder.

Changes we can make at sample stage

  • Slit height and position.
  • Waist: fixed, elasticated, or drawstring.
  • Length in three steps, priced per step.
  • Lining: full, half, or none.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.

The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder.

If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first. Confirm the ship window against the mill calendar and the holiday shutdown before the purchase order is signed.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top