Welcome to Bafinasa official website!

Buy Effortless Casual Sage Green Maxi Casual Dress

Source:News / Time:2026-11-19

Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. Written down, the request is buy effortless casual sage green maxi casual dress: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish. It helps to separate what the customer sees from what the factory feels. The outside is viscose crepe or cotton blend in green, the inside is structure, and the two have to agree on the same sample.

Approve colour under two lights, D65 and warm indoor. A black that reads neutral in an office can read green under shop lighting. Lining is not a detail. A 65 to 75 gsm taffeta slides over the cloth; a cheap lining grabs it and the garment climbs when the wearer walks. Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet. Under 200 gsm, plan to interface the waist seam. Without it, the seam ridge shows through at the first press.

Construction notes

Most of the handwork sits in a handful of steps, and each one has a right order. A maxi is a length decision before it is a style decision. Confirm the finished length on the wearer, in her shoes. The waist seam carries the weight of the skirt. Interface it lightly or the seam sinks under its own load. Slits are faced and bar-tacked at the top. An unbar-tacked slit opens within a week.

If the hem is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one. The hem is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample.

If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make. For Casual Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. We fit the middle size on a live model, then check the smallest and the largest on real bodies, not on the form.

Specification, item by item

Shella viscose crepe or a 110 gsm cotton blend with some weight, swatch-approved, one dye lot for bulk
Bodymaxi dress
Lengthmaxi
Colourwaygreen
Lininghalf lined to the hip
Closureinvisible centre-back zip
Size runS-3XL graded to your sheet
Sample lead time10-14 days on stock cloth
MOQ150 pcs per style

The places this usually goes wrong

  • Hem pressed with too much steam, leaving a wavy edge that cannot be corrected.
  • Waist seam un-interfaced, so the skirt drags it down at the centre front.
  • Length measured on the form, so bulk is short on a real body.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.

Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth. AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule. Lead time is normally 12 to 20 days for a first sample and 30 to 45 days for bulk, depending on stock cloth and handwork.

Options on the table

  • Length in three steps, priced per step.
  • Waist: fixed, elasticated, or drawstring.
  • Slit height and position.
  • Lining: full, half, or none.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.
  • Private label: woven label, care label and hangtag to your artwork.

Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.

A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together. Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top