Women's Sage Green Maxi Casual Dress
Nothing in this style is hard to sew. It is hard to sew consistently, which is a different problem and a more expensive one. We see this style in two versions. One is built to hit a price, the other to keep its shape for three seasons. They differ by about fifteen percent in cost and by a great deal in what comes back.
Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes. Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. We start with viscose crepe or cotton blend on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet.
How it is built
Most of the handwork sits in a handful of steps, and each one has a right order. Slits are faced and bar-tacked at the top. An unbar-tacked slit opens within a week. A maxi is a length decision before it is a style decision. Confirm the finished length on the wearer, in her shoes. Panels are cut on the same grain. A skirt panel cut slightly off shows as a twist at the hem after a day of wear.
If the hem is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one. Check the hem after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.
For Casual Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. We fit the middle size on a live model, then check the smallest and the largest on real bodies, not on the form. On this style the difference between a good and a poor fit is usually two centimetres at the side seam, not a redesign.
What goes on the spec sheet
| Shell | a viscose crepe or a 110 gsm cotton blend with some weight, swatch-approved, one dye lot for bulk |
| Body | maxi dress |
| Length | maxi |
| Colourway | green |
| Lining | fully lined, bagged hem |
| Closure | concealed side zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 150 pcs per style |
What to check before bulk
- Waist seam un-interfaced, so the skirt drags it down at the centre front.
- Length measured on the form, so bulk is short on a real body.
- Hem pressed with too much steam, leaving a wavy edge that cannot be corrected.
- A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
- Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem. Lead time is normally 12 to 20 days for a first sample and 30 to 45 days for bulk, depending on stock cloth and handwork. Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder.
Changes we can make at sample stage
- Lining: full, half, or none.
- Length in three steps, priced per step.
- Waist: fixed, elasticated, or drawstring.
- Slit height and position.
- Private label: woven label, care label and hangtag to your artwork.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.
The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder.
A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together. Confirm the ship window against the mill calendar and the holiday shutdown before the purchase order is signed.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.