White Bohemian Women's Boho Maxi Dress
The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the tier seam. Most of the money in a White Bohemian Women's Boho Maxi Dress sits in three places: the cloth, the tier seam, and the labour that keeps the waist seam flat after pressing.
The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded. Lining is not a detail. A 65 to 75 gsm taffeta slides over the cloth; a cheap lining grabs it and the garment climbs when the wearer walks. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. Cloth decides more than the brief admits. The same block in a 180 gsm wool blend and a 260 gsm double knit produces two different garments, one for the office and one for the evening.
Where the shape comes from
The build follows the same order on every size. These are the steps where the shape is won or lost. Trims and tassels go on after the first fitting. They change the weight of the hem and how the skirt falls. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes.
The tier line reads as a design choice and behaves as a construction one. It changes the seam order, and sometimes the closure. We keep the tier line as its own pattern piece so it can be changed without re-cutting the body.
If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the tier seam. A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping.
What goes on the spec sheet
| Shell | a 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk |
| Body | boho maxi dress |
| Length | maxi |
| Colourway | white |
| Lining | fully lined, bagged hem |
| Closure | stretch panel, no zip |
| Size run | 34-44 with a regional grade |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 100 pcs per colour |
What to check before bulk
- Print placement ignored at the centre front, so the motif lands off-centre in bulk.
- Tier seams pressed one way, making a ridge that reads through a light print.
- Gather ratios left to the operator, so two sizes of the same tier look different.
- A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
- A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth. Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem. Lead time is normally 12 to 20 days for a first sample and 30 to 45 days for bulk, depending on stock cloth and handwork.
Customisation that does not break the price
- Sleeve: blouson, flutter, or straight with a ruffle.
- Tier count and depth, priced per configuration.
- Print: stock, custom digital, or placement-matched at the front.
- Neckline: square with ties, V with a modesty panel, or elasticated.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.
- Private label: woven label, care label and hangtag to your artwork.
The fit sample is where the pattern is corrected. Changes after this point cost time, not only money. Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder.
A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together. A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.