For Women Mustard Yellow Tassel Boho Maxi Dress
A For Women Mustard Yellow Tassel Boho Maxi Dress can be made at almost any price. What changes is how long it keeps its line and how much of the making shows. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. Nothing in this style is hard to sew. It is hard to sew consistently, which is a different problem and a more expensive one. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch.
We start with cotton voile or viscose crinkle on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes. Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet.
How it is built
The build follows the same order on every size. These are the steps where the shape is won or lost. Loose weaves need a French or flat-felled seam. A plain overlock shows at the slit and at the hem. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes. Lining a sheer maxi is a design decision, not a default. State the lining length separately or it will be made to the shell.
The tier line is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample. Check the tier line after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.
Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample. We fit the middle size on a live model, then check the smallest and the largest on real bodies, not on the form. If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make.
Specification, item by item
| Shell | a 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk |
| Body | boho maxi dress |
| Length | maxi |
| Colourway | yellow |
| Lining | fully lined, bagged hem |
| Closure | stretch panel, no zip |
| Size run | S-3XL graded to your sheet |
| Sample lead time | 15-20 days with handwork |
| MOQ | 100 pcs per colour |
What to check before bulk
- Gather ratios left to the operator, so two sizes of the same tier look different.
- Cord channels sewn too narrow, so the drawstring jams after the first wash.
- Print placement ignored at the centre front, so the motif lands off-centre in bulk.
- A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
- The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth.
Options on the table
- Print: stock, custom digital, or placement-matched at the front.
- Tier count and depth, priced per configuration.
- Sleeve: blouson, flutter, or straight with a ruffle.
- Neckline: square with ties, V with a modesty panel, or elasticated.
- Shell swap: the same block in a lighter or heavier cloth, priced separately.
- Private label: woven label, care label and hangtag to your artwork.
The fit sample is where the pattern is corrected. Changes after this point cost time, not only money. Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there.
If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first. Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.