Welcome to Bafinasa official website!

Emerald Green Lace Boho Maxi Dress for Women

Source:News / Time:2026-11-14

Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. A Emerald Green Lace Boho Maxi Dress for Women can be made at almost any price. What changes is how long it keeps its line and how much of the making shows. Most of the money in a Emerald Green Lace Boho Maxi Dress for Women sits in three places: the cloth, the tier seam, and the labour that keeps the waist seam flat after pressing. This is a style that rewards a patient first sample. Every shortcut taken on the block comes back later as a return, a re-cut or a discount.

We start with lace on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Cloth decides more than the brief admits. The same block in a 180 gsm wool blend and a 260 gsm double knit produces two different garments, one for the office and one for the evening. For lace, order five to eight percent extra. Cutting around a shade band costs more than the cloth. Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes.

Structure and seams

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Trims and tassels go on after the first fitting. They change the weight of the hem and how the skirt falls. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes.

When the brief names the tier line, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain. We keep the tier line as its own pattern piece so it can be changed without re-cutting the body.

On this style the difference between a good and a poor fit is usually two centimetres at the waist seam, not a redesign. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the tier seam. Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample.

The sheet we need before costing

Shelllace, swatch-approved, one dye lot for bulk
Bodyboho maxi dress
Lengthmaxi
Colourwaygreen
Lininghalf lined to the hip
Closurestretch panel, no zip
Size runXS-2XL plus a curve block
Sample lead time12-18 days after spec sign-off
MOQ300 pcs per style

What to check before bulk

  • Tier seams pressed one way, making a ridge that reads through a light print.
  • Gather ratios left to the operator, so two sizes of the same tier look different.
  • Cord channels sewn too narrow, so the drawstring jams after the first wash.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Set stitch density at 12 to 14 per inch on woven seams and check it at the machine, not on the finished garment. Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem.

Changes we can make at sample stage

  • Tier count and depth, priced per configuration.
  • Neckline: square with ties, V with a modesty panel, or elasticated.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.

Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.

If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top