Welcome to Bafinasa official website!

For Women Tassel Boho Maxi Dress

Source:News / Time:2026-11-14

It helps to separate what the customer sees from what the factory feels. The outside is cotton voile or viscose crinkle, the inside is structure, and the two have to agree on the same sample. This is a style that rewards a patient first sample. Every shortcut taken on the block comes back later as a return, a re-cut or a discount. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. We see this style in two versions. One is built to hit a price, the other to keep its shape for three seasons. They differ by about fifteen percent in cost and by a great deal in what comes back.

Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet. Under 200 gsm, plan to interface the tier seam. Without it, the seam ridge shows through at the first press. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. We start with cotton voile or viscose crinkle on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form.

Construction notes

The build follows the same order on every size. These are the steps where the shape is won or lost. Loose weaves need a French or flat-felled seam. A plain overlock shows at the slit and at the hem. Lining a sheer maxi is a design decision, not a default. State the lining length separately or it will be made to the shell. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes.

If the tier line is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one. The tier line is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample.

Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the tier seam to move at different rates. A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the tier seam.

The sheet we need before costing

Shella 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk
Bodyboho maxi dress
Lengthmaxi
Colourwaybuyer colourway, lab-dipped under two lights
Liningbodice lined, skirt lined
Closureinvisible centre-back zip
Size run34-44 with a regional grade
Sample lead time15-20 days with handwork
MOQ300 pcs per style

What to check before bulk

  • Cord channels sewn too narrow, so the drawstring jams after the first wash.
  • Tier seams pressed one way, making a ridge that reads through a light print.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
  • A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.

Schedule an in-line check after the tier seam goes on. Catching a rotation there costs minutes; catching it at final costs the order. Lead time is normally 12 to 20 days for a first sample and 30 to 45 days for bulk, depending on stock cloth and handwork. Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth.

What we can change for you

  • Tier count and depth, priced per configuration.
  • Neckline: square with ties, V with a modesty panel, or elasticated.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.

Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. The proto is usually made in stock cloth. Do not judge the hand from it; judge the line.

A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed. Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top