For Women Sage Green Maternity Boho Maxi Dress

Written down, the request is for women sage green maternity boho maxi dress: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. It helps to separate what the customer sees from what the factory feels. The outside is cotton voile or viscose crinkle in green, the inside is structure, and the two have to agree on the same sample.

Cloth decides more than the brief admits. The same block in a 180 gsm wool blend and a 260 gsm double knit produces two different garments, one for the office and one for the evening. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. Lining is not a detail. A 65 to 75 gsm taffeta slides over the cloth; a cheap lining grabs it and the garment climbs when the wearer walks. The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded.

Construction notes

Most of the handwork sits in a handful of steps, and each one has a right order. Measure a maxi from the waist once the skirt is gathered, not from the shoulder on the flat. Loose weaves need a French or flat-felled seam. A plain overlock shows at the slit and at the hem. Trims and tassels go on after the first fitting. They change the weight of the hem and how the skirt falls.

The tier line is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample. If the tier line is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one.

On this style the difference between a good and a poor fit is usually two centimetres at the waist seam, not a redesign. For Boho Maxi Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the tier seam.

Spec sheet, line by line

Failure points worth designing out

• Tier seams pressed one way, making a ridge that reads through a light print.
• Print placement ignored at the centre front, so the motif lands off-centre in bulk.
• Cord channels sewn too narrow, so the drawstring jams after the first wash.
• The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
• Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.

AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule. Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Schedule an in-line check after the tier seam goes on. Catching a rotation there costs minutes; catching it at final costs the order.

Customisation that does not break the price

• Neckline: square with ties, V with a modesty panel, or elasticated.
• Print: stock, custom digital, or placement-matched at the front.
• Tier count and depth, priced per configuration.
• Sleeve: blouson, flutter, or straight with a ruffle.
• Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.

Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth.

Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question. A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.