Turquoise White Boho Maxi Dress for Women
Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the tier seam. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. Most of the money in a Turquoise White Boho Maxi Dress for Women sits in three places: the cloth, the tier seam, and the labour that keeps the waist seam flat after pressing.
Lining is not a detail. A 65 to 75 gsm taffeta slides over the cloth; a cheap lining grabs it and the garment climbs when the wearer walks. Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. Under 200 gsm, plan to interface the tier seam. Without it, the seam ridge shows through at the first press. The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded.
How it is built
Most of the handwork sits in a handful of steps, and each one has a right order. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes. Loose weaves need a French or flat-felled seam. A plain overlock shows at the slit and at the hem. Lining a sheer maxi is a design decision, not a default. State the lining length separately or it will be made to the shell.
The tier line reads as a design choice and behaves as a construction one. It changes the seam order, and sometimes the closure. We keep the tier line as its own pattern piece so it can be changed without re-cutting the body.
Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample. Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the tier seam to move at different rates. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the tier seam.
Specification, item by item
| Shell | a 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk |
| Body | boho maxi dress |
| Length | maxi |
| Colourway | white |
| Lining | fully lined, bagged hem |
| Closure | concealed side zip |
| Size run | S-3XL graded to your sheet |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 150 pcs per style |
What to check before bulk
- Cord channels sewn too narrow, so the drawstring jams after the first wash.
- Gather ratios left to the operator, so two sizes of the same tier look different.
- Tier seams pressed one way, making a ridge that reads through a light print.
- A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
- Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule. Pressing is a step, not a rescue. A seam pressed open before the next one is sewn behaves differently from one pressed at the end.
What we can change for you
- Print: stock, custom digital, or placement-matched at the front.
- Tier count and depth, priced per configuration.
- Sleeve: blouson, flutter, or straight with a ruffle.
- Neckline: square with ties, V with a modesty panel, or elasticated.
- Shell swap: the same block in a lighter or heavier cloth, priced separately.
- Private label: woven label, care label and hangtag to your artwork.
Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.
Confirm the ship window against the mill calendar and the holiday shutdown before the purchase order is signed. Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
